- This instrument is designed and made as per standards GB/T6536 Test
Method for Distillation Characteristics of Petroleum Products andASTM D86.
- It is suitable to determine the distillation characteristics ofgasoline, aviation gasoline, jet fuels, solvent having special
boiling point, naphtha, diesel oil, distillate fuels, and other
- This instrument is not only suitable to the organizations of high
frequency with various of samples but also accelerate the test
speed for common users.
- It is an ideal distillation tester for petroleum products.
II---Main technical features
1.The instrument adopts double units working mode, can do test for
one sample as well as two samples which having the same
specification or different specifications.It highly improves the
2.It adopts two groups of independent digital temperature
controller, heater, electric stirrer to constitute two constant
temperature baths. Each bath temperature can be adjusted and
controlled independently.The temperature in the bath is uniform,can
fully meet the requirements of test.
3.It adopts special heating furnace to ensure the safety of test.
Heating power can be stepless adjusted to meet the requirements of
III---Main technical specifications and parameters
1.Power supply: AC(220±10%)V, 50Hz
2.Heating power of electric furnace: 1000W×2, stepless adjustable.
3.Capacity of measuring cylinder: 100ml, division value is 1ml.
4.Distillation flask: 125ml,meet the requirements of GB/T 6536
5.Thermometer: Stick type, complete immersion, scale range for
6.Active plate of electric furnace: silicon carbide, bore diameter
is: φ32mm, φ38mm, φ50mm.
7.Temperature controller:1) Control range: (room
2) Accuracy: ±0.5°C
3) Temperature display: LED
Notification: The temperature control is to control the temperature
of condensate in the condenser pipe.
8.Ambient temperature: ≤35°C
9.Relative humidity: ≤85%
10.Overall power consumption: ≤2200W